Albalá Ingenieros, S.A. IMB2000C01, Руководство пользователя

Страница: 22 / 36

Albalá Ingenieros | Manual IMB2000C01
TTL_TX 0x08 0xFF Y N Time To Life for transmitted packets
= x
TX_SR_PORT 0x09 0xFFFF Y N Source port
= x
OFFSET_TIME_RX 0x0B 0xFF N N Margin of safety before inserting samples in buffer to avoid overflow
= x samples
ETH_MODE_1 0x0C 0x07 Y N Allows selecting the Ethernet operating mode
7=Auto, 0=10Mbps HD, 4=10Mbps FD, 1=100Mbps HD, 5=100Mbps FD,
2=1Gbps HD, 6=1Gbps FD
SPEED_FORCE_1 0x0C 0x40 Y N Allows selecting if the speed/mode is forced or announced for autonegotiation
0=Announced, 1=Forced
ADDRESS_1_2_EN 0x0C 0x80 Y N Interface 2 enable
0=No, 1=Yes
ETH_MODE_2 0x0D 0x07 Y N Allows selecting the Ethernet operating mode
7=Auto, 0=10Mbps HD, 4=10Mbps FD, 1=100Mbps HD, 5=100Mbps FD,
2=1Gbps HD, 6=1Gbps FD
SPEED_FORCE_2 0x0D 0x40 Y N Allows selecting if the speed/mode is forced or announced for autonegotiation
0=Announced, 1=Forced
ADDRESS_2_2_EN 0x0D 0x80 Y N Interface 2 enable
0=No, 1=Yes
RAM
Name add ext msk snmp trap Description
LOCAL_IP_GWAY_3 0x05 0xFF Y N Gateway IP address (3)
= x
LOCAL_IP_GWAY_2 0x06 0xFF Y N Gateway IP address (2)
= x
LOCAL_IP_GWAY_1 0x07 0xFF Y N Gateway IP address (1)
= x
LOCAL_IP_GWAY_0 0x08 0xFF Y N Gateway IP address (0)
= x
SLOT1_M2S_INS 0x00 0x0010 0x01 Y N Backplane slot 1 M2S insert
0=Disabled, 1=Enabled
SLOT2_M2S_INS 0x00 0x0010 0x02 Y N Backplane slot 2 M2S insert
0=Disabled, 1=Enabled
SLOT3_M2S_INS 0x00 0x0010 0x04 Y N Backplane slot 3 M2S insert
0=Disabled, 1=Enabled
SLOT4_M2S_INS 0x00 0x0010 0x08 Y N Backplane slot 4 M2S insert
0=Disabled, 1=Enabled
SLOT5_M2S_INS 0x00 0x0010 0x10 Y N Backplane slot 5 M2S insert
0=Disabled, 1=Enabled
SLOT6_M2S_INS 0x00 0x0010 0x20 Y N Backplane slot 6 M2S insert
0=Disabled, 1=Enabled
SLOT7_M2S_INS 0x00 0x0010 0x40 Y N Backplane slot 7 M2S insert
0=Disabled, 1=Enabled
SLOT8_M2S_INS 0x00 0x0010 0x80 Y N Backplane slot 8 M2S insert
0=Disabled, 1=Enabled
PROFILE 0x01 0x0010 0x0F Y N Allows loading default values of a PTP profile
0=General, 1=SMPTE ST 2059, 2=AES67, 3=IEEE 802.1
AS,4=SMPTE/AES,15=Custom
DOMAIN_NUMBER 0x02 0x0010 0xFF Y N Allows selecting the Domanin number attribute of the local clock
= x
LOG_ANNOUNCE_INT 0x03 0x0010 0xFF Y N Allows selecting the mean interval between Announce messages
= 2^x s
LOG_SYNC_INT 0x04 0x0010 0xFF Y N Allows selecting the mean interval between Sync messages
= 2^x s
LOG_MIN_D_R_INT 0x05 0x0010 0xFF Y N Allows selecting the minimum mean interval between Delay_Req messages
= 2^x s
STREAM_OK_1 0x00 0x0020 0x01 Y N AES67 stream 1 received
1=OK, 0=Fail
BUFFER_UNDERF_1 0x00 0x0020 0x02 Y N Buffer underflow
0=OK,1=Fail
BUFFER_OVERF_1 0x00 0x0020 0x04 Y N Buffer_overflow/TS error
0=OK,1=Fail
MALFORMED_PCK_1 0x00 0x0020 0x20 Y N Malformed packets
0=OK,1=Fail
RX_FAIL_1 0x00 0x0020 0x40 Y N RX1 stream fail
0=OK,1=Fail
RX_1_PCK_RATE 0x01 0x0020 0xFFFF Y N IP packet rate
= x packets/s
22