AlbaChem Alba-STEAM, Инструкция по эксплуатации

Страница: 4 / 8

0
HOW TO ASSEMBLE AND USE
Remove the steam station from its packing and make sure all packing has been
removed (including the protective bags). Put the station on a flat and solid surface.
&RQQHFWWKHVWHDPJXQXVLQJWKHTXLFNGLVFRQQHFWIRUWKHVWHDPKRVHDQGSOXJLQWKH
SLQUHFHSWDFOH
Insert the wan E into the flange on top of the boiler, tighten with
the side screw.
Unscrew the safety cap (1). Fill the boiler with a maximum of 8.45 cups (2 litres) of
wate
U
. Use the funnel supplied, making sure you do not over-fill the tank (you can
also use the water stick to determine the water level in the steam tank).
Insert the plug into the electrical outlet; switch on the boiler (4) and steam button
(3). When the two button lights come on, the steam device and boiler are working.
Wait 10 minutes for the boiler to reach maximum pressure. Once it reaches 50 psi,
the unit is now ready to operate. NOTE: The red light on the boiler switch (4) will
turn on and off during use, indicating that the heating element is activated or not.
NOTE: When you call for steam for the first time (after having turned the boiler on)
you might notice a fast decrease in pressure. This is normal for the first time.
The steam station is ready for use.
This steam product is equipped with a low water warning light (5) and the thermo-
stat reset button (9 or 10). During operation, if the light comes on, it indicates that
the unit requires more water to operate. If this occurs, please follow these steps.
• Press the steam button to ensure there is no more steamin the boiler.
• Slowly open the pressure cap (1) and refill to the required level with warm water.
• Replace the cap, tighten and press the thermostat reset button (9 or 10), wait
for it to build up pressure again.
IMPORTANT
When you are finished using the boiler for the day, unscrew the fill cap one-turn on the
unit to release the steam/air from the tank. This will eliminate the vacuum that may cause
damage to the pressure gauge as well as the safety cap.