DVD Recorder
33
Timer Recording
Setting the Correct Date and Time
To perform timer recording events, the DVD Recorder must be set to the
correct date and time. This should have been done when completing the
Initial Setup Wizard when the DVD Recorder was first turned on. If this
has not been completed, follow the instructions below.
Press the
TIMER
button. The Timer menu will appear as shown below.
Use the
UP
and
DOWN ARROW
buttons to highlight Date Time Setting.
Press the
RIGHT ARROW
button to access the Date Time Setting
screen.
Use the
LEFT
and
RIGHT ARROW
buttons to select the Day (D), Month
(M), Year (Y), Hours (H) and Minutes (M). To adjust the selection, use
the
UP
or
DOWN ARROW
buttons or alternatively enter a value using
the
NUMERIC
buttons.
Once the correct date and time have been set, press the
PLAY/ENTER
button.
RDVD1002.book Page 33 Tuesday, January 24, 2006 12:25 PM
