Page 6
Remote control battery installation
1:
Remove the battery cover
(as shown)
.
2:
Insert
2
x
AAA
batteries, taking note that the polarities
match up .
3:
Replace the battery cover, in the same manner as you
removed it .
1
2
3
Notes on battery usage
•
Do not insert battery into the remote control in the
wrong direction .
•
Do not charge
,
heat
,
open or short-circuit the
battery . Do not throw battery into a fire .
•
If the remote control does not function correctly or
if the operating range becomes reduced
,
replace all
batteries with new ones .
•
Improper replacement of batteries may result
in explosive hazard . It must be replaced only by
batteries with the same or equivalent type .
Connection to a TV
TV
AV Cable
DVD Player
Connection to a TV (cont)
NOTE:
before attempting to connect this unit to
a TV, ensure that the
CDVD7SW/SWP
and TV are
both switched off.
1:
Insert the
3 .5mm
end of an
AV
cable
(supplied )
into
the
AV OUTPUT
socket
(13)
on the side of the unit .
2:
Insert the other ends
( coloured red
,
white & yellow )
into your
TV .
3:
The red & white sockets carry audio . They can be
connected to either the
TV
inputs or an external
amplifier .
Take note to match the colours when
connecting .
4:
The yellow cable is the video cable and must be
connected to the yellow video input on your
TV .
5:
After tuning your
TV
to the correct input the content
of the
CDVD7SW/SWP
will appear on the
TV
screen .
To disable playback on the
CDVD7SW/SWP
display
press the
TFT
button
(8)
on the unit or remote control .
Connecting an external source to the display
It is possible to connect an external source to
the CDVD7SW/SWP to allow playback on the
integrated display .
AV Cable
DVD Player
External DVD Player
1:
Insert the
3 .5mm
end of an
AV
cable
(supplied )
into the
AV INPUT
socket on the side of the unit .
2:
Insert the other ends
( coloured red
,
white & yellow )
into your
VIDEO SOURCE
outputs .
3:
After making the connections you must press the
SOURCE
button
(4)
to switch to the
‘AV IN’
mode .
4:
Should you need to switch back to the internal
DVD
player, press the
SOURCE
button
(4)
again .
Installation
