Page 5
CD operation (cont)
5:
Press the
CD-PLAY/PAUSE
button once more to pause playback.
The dot on the display will flash to indicate pause mode is active. Press the
CD-
PLAY/PAUSE
button again to resume playback.
6:
Press the
CD-STOP
button to stop playback. The
LED DISPLAY
shows the total
number of tracks again.
Skip tracks and search for a specific point to play
1:
Press the
CD-SKIP+
button once during playback to skip to the next track. To
skip to a specific track ahead, press this button several times until you reach
the track number required.
2:
Press the
CD-SKIP-
button once during playback to return to the beginning of
the current track. Press the
CD-SKIP-
button twice repeatedly to skip to the
previous track. To skip back to a specific track, press this button several times.
3:
Press and hold the
CD-SKIP+
button during playback to fast forward the
current track.
4:
Press and hold the
CD-SKIP-
button during playback to fast rewind the current
track.
Programmed playback
Program an alternative play order of up to 100 tracks follow the below steps.
1:
Make sure the unit is in
STOP
mode and not playing a disc.
2:
Press the
CD-PROGRAM
button, the display will show
‘01’
flashing.
3:
Select a track using the
CD-SKIP-
/
CD-SKIP+
buttons. When you have located
the track you wish to assign to slot
‘01’
press the
CD-PROGRAM
button to store
and advance to the next slot.
4:
Continue programming tracks until you reach the maximum allowed or as
many as you require.
5:
When programming is complete, press the
CD-PLAY/PAUSE
button to begin
the programmed playback order. Pressing the
CD-PLAY/PAUSE
button during
playback will
PAUSE
the audio.
6:
Press the
CD-STOP
button twice to cancel a programmed sequence and return
to the default play mode.
Repeat mode CD
To repeat a single track or an entire disc follow the below steps.
1:
Press the
CD-REPEAT
button during or before playback of a disc.
2:
A dot will appear on the
LED DISPLAY
to the left of the track number and flash
to indicate
REPEAT 1
is active
(this mode repeats only the current track)
.
3:
Press again or twice from default mode will display a static dot to the left of the
track number to indicate
REPEAT ALL
is active
(this mode plays all tracks on
the current disc)
.
4:
Pressing the
CD-REPEAT
button once more disables any
REPEAT
modes and
resumes default playback.
User instructions
REPEAT 1
REPEAT ALL
NORMAL
PLAYBACK
