Series AFS8202M
Alba Fiber Systems Inc. Specifications are subject to change without notice.
Page 24 6/20/14
www.albafiber.net
Industrial Redundant Managed Ethernet Media Converter with 2 Ports
1 x 10/100/1000BaseT(X) Port, 1 x 1000M SFP Port
CLI COMMANDS
Address
Set up the IP address
Configuration
Display the configuration of the switch
DHCP
If the IP address assigned by DHCP or not
Route
Configure the routing information
WEB INTERFACE
To configure an IP address:
1. Click System >> IP Status >> Edit.
2. Specify the IPv4 settings, and enable DNS proxy service if required.
3. Click Save.
Fig. 21 shows IP Configuration
Fig. 21 IP Configuration
6.1.3 SNTP Configuration
Use the SNTP Configuration page to specify the Network Time Protocol (SNTP) servers to query
for the current time. SNTP allows the switch to set its internal clock based on periodic updates
from an NTP time server. Maintaining an accurate time on the switch enables the system log to
record meaningful dates and times for event entries. If the clock is not set, the switch will only
record the time from the factory default set at the last boot up.
