V
O
LT
A
G
E
S
E
L
E
C
T
24V
12V
B
A
T
D
E
T
E
C
T
E
A
R
T
H
G
N
D
D
E
T
E
C
T
AC ON
OUTPUT VOLTAGE
SELECT SWITCH
EARTH GOUND
DETECTION ENABLE
BATTERY PRESENCE
DETECTION ENABLE
AC PRESENCE
VISUAL INDICATOR
Figure 5.2.1.1
5.1.2.1.1.2 Jumper Settings
For proper operation, the jumpers on the internal PS5-M should be set appropriately.
These jumpers may be set with the unit powered or unpowered.
Buss 1
Buss 1
ABC Buss Select
JP5, JP6, JP7 (Buss 1 / Buss 2)
Enable
Jumper On - Enable
Jumper Off - Disable
Earth Ground Fault
Detection
JP9 (Earth Ground Detect))
Enable
Jumper On - Enable
Jumper Off - Disable
Battery Presence Fault
Detection
JP10 (Bat Detect)
Default
Settings
Description
Jumper
5.1.2.1.1.2.1 JP10 (Bat Detect) - Battery Presence
This jumper allows disabling of the battery presence detection for applications where
no backup battery set is used.
5.1.2.1.1.2.2 JP9 (Earth Ground Detect)
This jumper allows disabling of the Earth Ground Fault detection for applications that
either don’t require Earth Ground Fault detection, or for applications where Earth
Ground Fault detection is already provided by the panel.
5.1.2.1.2.3 JP5, JP6, JP7 (Buss 1 / Buss 2)
The fuse should be set for Buss 1 under all conditions in the RMMV
Fig 5.1.1.2
AC FLT
COM
FLT
GND FLT
BUSS2
BUSS1
ABC
C
O
M
F
L
T
A
C
F
L
T
C
C
N
C
N
C
N
O
N
O
RMMV Series Installation Instructions
7/13/2009, 10:26:56 AM
52-391 Rev A.02
Page 12 of 20
AlarmSaf
65A Industrial Way, Wilmington, MA 01887 978 658 6717 www.alarmsaf.com
