1 3/8” (3.5 cm) mortise cylinder supplied
with the DL/PDL4500.
Interchangeable Core Option, Special
Core Preps available as well as Regal
Handle Trim
4100 Cylindrical Specifications
Operation:
Authorized digital code or prox technology ID allows
lever to retract latch. Inside lever is always in passage mode and
permits instant egress.
Operating Temperature:
Weatherproof lock with operating range
from -31 degrees below to 151degrees F.
Keypad:
Weatherproof, all-metal, 12-button programmable for
multi-level access functions. Proximity antenna housing molded of
ultra high strength, impact resistant Lexan
®
.
Programming:
Locking modes, event schedules, group or
individual user codes, master and management codes, passage
and emergency or service code, lockout and remote override
capability and allowable entry time (3, 10 or 15 seconds), etc. are
programmable through the keypad, the AL-DTM (data transfer
module) or Alarm Lock DL – Windows PC Software.
Audit Trail:
Lock’s activity log can be extracted by using the AL-
DTM (data transfer module), the AL-PCI (PC interface) and/or can
be on-site printed using the AL-IR1 (hand-held infrared printer)
Power:
5AA alkaline batteries, furnished. Audible low battery alert,
visual and audible entry indicators; 60,000 cycles, typical.
Door Thickness:
1 5/8” to 1 7/8” standard. For 1 3/8” doors use
S6072 spacers. For other thickness’, please consult factory.
Backset:
2 3/4” standard. 2 3/8” backset also available.
Door Prep:
Standard ANSI A115 Series Prep modified by adding
additional through-bolt holes.
Cylinder:
Solid brass 6 pin tumbler cylinder keyed 5, SCI keyway,
furnished in all K.O. models. Tailpieces for Schlage (HW580) & Lori
(HW620) cylinders (furnished). Standard IC core models accept
Arrow
®
, Best
®
. Falcon
®
, KSP
®
and Kaba Peaks
®
6 or 7 pin IC core
cylinders (not furnished). Alarm Lock tailpiece for use with IC core
cylinders is furnished. IC core models prepped for Yale
®
, Medeco
®
,
Corbin-Russwin
®
, Sargent
®
and
Schlage
®
also available.
Strike:
1 1/8” x 2 3/4” T strike
standard. With screws for wood
or metal jambs. 1 1/4” x 4 7/8”.
ASA strike also included.
Finishes:
US3 polished brass,
US26D satin chrome, US26
polished chrome, US5
antique brass, plus special
order finishes (including
Durondic US1OB).
Compliances:
Grade I heavy
duty cylindrical lockset. UL
listed to the 1OC Positive
Pressure Specification.
Latchbolt is UL listed and
3-hour fire rated. FCC certified.
ADA compliant levers.
4500 Mortise Specifications
Operation:
Authorized digital code or prox technology ID (e.g HID
card) enables outside lever to retract latchbolt, deadlocking latch and
deadbolt (where applicable). Inside lever is always in passage mode
and permits instant egress.
Operating Temperature:
Weatherproof lock with operating range
from -31 degrees below to 151degrees F.
Keypad:
Rugged weather-resistant all-metal, 12-button programmable
for multi-level access functions.
Programming:
Locking modes, event schedules, group or individual
user codes, master and management codes, passage and emergency
or service code, lockout and remote override capability and allowable
entry time (3, 10 or 15 seconds), etc. are programmable through the
keypad, from the Data Transfer Module (AL-DTMII) or using any PC
running Alarm Lock DL-Windows Software.
Audit Trail:
Locks’ entry activity log can be polled to the Data Transfer
Module (AL-DTMII), any PC using DL-Windows Software, and/or can
be on-site printed using the hand-held infrared printer (AL-IR1).
Power:
5AA alkaline batteries extended operations, furnished. Also
optional AC auxiliary power using 6-12 volt power supply. Audible
low battery alert, visual and audible entry indicators, 60.000 cycles,
typical.
Door Thickness:
Standard I 3/4” (4.46cm) thickness. (Accepts I 3/8”
to 1 7/8” or 3.5 to 4.7 cm).
Backset:
2 3/4” (7.01 cm)
Door Prep:
Standard ANSI 115.1 Mortise prep. modified with added
through-bolt holes.
Cylinder:
1 3/8” (3.5cm) mortise cylinder supplied. 1 3/4” - 1’ 1/2” (3.5
- 3.82cm) mortise cylinders accepted. Classroom Models are supplied
with cylinder with straight cam. Deadbolt Models are supplied with
cylinder with cloverleaf cam.
Classroom Models:
Feature stainless steel latchbolt with 3/4” (1.91
cm) projection and deadlocking latch.
Deadbolt Models:
Feature stainless steel deadbolt with 1” (2.55 cm)
projection, latchbolt with 3/4” (1.91 cm) projection and deadlocking
latch. Deadbolt may be projected from key cylinder from outside
door or tum-piece from inside door.
Interchangeable Cores:
Will accept interchangeable core mortise
cylinders with compatible cams. Not Supplied.
Trim:
Standard Trilogy Handle Leverset (squared) or optional Regal
curved lever handle.
Handling:
Specify Right or Left hand when
ordering. If reverse handing is required, lock is
field reversible. See installation instructions
for directions.
Strike:
ASA strike supplied, matched to
classroom or deadbolt function model
& lock handing. Standard strike is 4 7/8”
(12.43 cm) and includes combination
wood/metal screws.
Finishes:
US26D Satin Chrome, US5 Antique
Brass, DS3 Polished Brass, US26 Polished
Chrome and 10B Duronodic.
Compliances:
Steelcase lockbody meets
BHMA specifications for Grade 1
locks. UL Listed to the IOC Positive
Pressure Specification. Latchbolt is
UL Listed, and 3-hour fire rated. FCC
Certified. ADA compliant lever.
