Mounting the module and connecting the antenna
Caution
: Be free of static electricity before handling electronic components. Touch a grounded metal surface before
touching the circuit board.
To mount the module:
1. Press down on the top of the enclosure cover as shown in the following image, and set it aside.
2. The LTE module requires 2 antennas for proper operation. Both antennas are pre-installed for convenience. The
larger antenna will be connected to antenna connector 1 and the smaller antenna will be connected to antenna
connector 2.
3. For optimal signal strength the antennas should be placed as far away from the module as possible and as far
away from each other as possible, as shown in the
Figure 4
.
Figure 4: Antenna connections
Updated: Wed, 04 Mar 2020 15:12:44 GMT
7
