❸
Activate the WPS mode on the router. The camera will
begin to connect to the Wi-Fi network. The LED will be
solid green when the connection is complete.
❹
See the Add the device to an account section to
complete the installation.
Add the device to an account
Add the camera to the account using one
of the following methods:
Customer Website
❶
Using a web browser, enter the following URL:
www.alarm.com/addcamera. You will need the
username and password of the account to log in
to the Customer Website.
❷
Select the camera from the video device list or enter
its MAC address to begin adding the camera.
The MAC address is located on the bottom of the
device or on the packaging.
❸
Follow the on-screen instructions to finish
adding the camera.
Mobile App Installation Wizard
❶
Log in to the Alarm.com Mobile App. You will need the
username and password of the account to log in.
❷
Tap the navigation menu.
❸
Tap Add Device > Video Camera > ADC-V515.
❹
Follow the on-screen instructions to finish
adding the camera.
MobileTech Installation
❶
Log in to MobileTech.
❷
Select the customer’s account.
❸
Tap Quick Actions > Add Device > Video.
continued
❹
Follow the on-screen instructions to finish
adding the camera.
You can now power down the camera and install it in its
final location using the included hardware. You may
configure camera settings from the Customer Website.
Status light guide
Off
Power off
Solid green
Connected to Alarm.com
Blinking green
Local network connection
Blinking green and red
Reverting to factory default settings
Blinking red
Power on, camera booting
Solid red
No local or Internet connection
Blinking blue
WPS mode
Blinking white
Wi-Fi Access Point mode
4
5
