Alaris S2050, Руководство пользователя

Страница: 37 / 76

A-61870 July 2017
29
3 Scanning
Settings for reliable feeding
Active Feeding
Active Feeding can help to align and prepare the leading edges of small
stacks (30 or fewer sheets) prior to feeding. If the document set for a
job typically is smooth paper of mixed sizes, Active Feeding can help it
feed reliably. In the TWAIN setup for your job:
• Settings
• Device
• Transport tab: set Active Feed to Normal for documents sets that do
not contain lightweight or fragile papers. Gentle should be used when
the stack contains lightweight or fragile paper. Keep Active Feed on
None for delicate paper or paper lighter than 7 lb.
Enhanced Separation
Enhanced Separation aids in reducing multifeeds at the start of
scanning. This feature is
on by default because it is recommended for
all feeding applications. Page types that separate easily may feed
reliably with this feature turned
off . Turning enhanced separation off will
allow scanning to begin slightly more quickly.
In the TWAIN setup for your job:
• Settings
• Device
• Transport tab: un-check Enhanced Separation if your pages
separate reliably. Check Enhanced Separation if your jobs
occasionally have multifeeds at the start of scanning.
Mixed paper
Follow the tips above in “Preparing documents for scanning” and
“Settings for reliable feeding”. Try to stack the input paper so it is
centered, side to side in the input tray. Lead edges should align or be
feathered.
If you want output pages to align at the trailing edge (which can be
useful when input pages are different lengths), raise the scanner on its
tilt stand:
1. Tip the scanner backwards.
2. Pull the tilt stand legs down until they snap into their extended
position. See “Underside view” on page 7.
3. Tip the scanner forwards until it rests on the tilt stand legs. This
configuration will encourage output pages to settle against the
scanner.