8
A-61882 December 2018
Using the Alaris Passport Flatbed Accessory
Flatbed scanning
(S2000 Series)
Passports - profile
settings
Use the flatbed to scan passport documents that cannot be fed through
the scanner. The flatbed is shown without the cover (see below) so the
flatbed switch is visible. To scan a document that will activate the
flatbed switch (see below), modify the TWAIN driver profile setting as
follows:
1. Set
Paper source
to
Automatic
. If there is no paper in the scanner
input tray, the application will expect to scan at the flatbed.
2. If you will sometimes scan multiple items into the same file, set
Action when timeout occurs
to
Pause Scanning - wait for paper
.
3.
Un-check
Automatically start scanning
.
For an ISIS application: review the ISIS help file for system
configuration.
Passports - initiate
scanning
You can scan passports in two ways: by scanning just one page at a
time, or by scanning two pages at the same time. Either way, to scan a
passport:
1. Choose the scanning profile or task to use in your application.
2. Remove all pages from the input tray of the scanner.
3. Select the Play/Scan/Start icon in your scanning application.
4. Place the passport
face down
on the glass platen. You can scan
two pages or one. The left illustration shows scanning two pages;
the right shows scanning one page. For either case, the passport
should touch both the far edge and the right edge of the platen.
Keep your hand on the passport for best results. Scanning will begin
when the passport activates the switch.
Содержание Passport Flatbed Accessory
Страница 1: ...Passport Flatbed Accessory A 61882 User s Guide...
Страница 2: ......
Страница 16: ...12 A 61882 December 2018 Using the Alaris Passport Flatbed Accessory...
Страница 17: ......