Alaris Passport Flatbed Accessory, Руководство пользователя

Страница: 10 / 18

6
A-61882 December 2018
Using the Alaris Passport Flatbed Accessory
Flatbed scanning
(E1000 Series)
Passports
Use the flatbed to scan passport documents that cannot be fed through
the scanner. You can scan passports in two ways; by scanning just one
page at a time, or by scanning two pages at the same time. Either way,
to scan a passport:
1. On the TWAIN driver profile settings screen, set Paper source to
Automatic . If there is no paper in the scanner input tray, the
application will expect to scan at the flatbed.
For an ISIS application: review the ISIS help file for system
configuration.
2. Choose the scanning profile or task to use in your application.
3. Remove all pages from the input tray of the scanner.
4. Place the passport face down on the glass platen. You can scan
two pages or one. The left illustration shows scanning two pages;
the right shows scanning one page. For either case, the passport
should touch both the far edge and the right edge of the platen.
Keep your hand on the passport for best results.
5. Select the Play/Scan/Start icon in your scanning application.
Smaller documents
Use the flatbed to scan other types of small documents that cannot be
fed through the scanner.
1. On the TWAIN driver settings screen, set Paper source to
Automatic . If there is no paper in the scanner input tray, the
application will expect to scan at the flatbed.
For an ISIS application: review the ISIS help file for system
configuration.
2. Choose the scanning profile or task to use in your application.
3. Remove pages from the scanner input tray.
4. Place the small document on the flatbed platen.
5. Select the Play/Scan/Start icon in your scanning application.