Alan HP446, Руководство пользователя

Страница: 32 / 47

8 Basic Operations
Charging the battery pack
To charge the supplied battery pack you have to setup the standard
charger and connect the radio as follows:
1) Connect the jack coming from the AC adaptor to the cradle’s
socket.
2) Connect the AC plug of the AC adaptor’s power cable into an
earthed AC power outlet.
3) Ensure that the radio is switched off.
4) Insert the radio into the cradle with the keypad toward you (the
three metallic contacts of the battery pack must touch with the
three contacts inside the cradle).
The battery charger is for indoor use only.
For the next charges, best duty and battery life please fully
see the chapter “Battery Packs”.
Basic Operations
This section describes how the standard operations work. Standard
operation can be changed by the network administrator. For this
reason the way your radio operates may slightly differ from what is
described here.
IMPORTANT: In case of doubts please contact your dealer/radio
network administrator for further details.
Switching the radio ON/OFF
To switch the radio on:
1) Rotate the VOL knob clockwise until the radio is switched on:
the CPU will start an autotest showing in sequence:
• LED will light GREEN, then RED and finally OFF.
• LCD will display all segments and icons. Finally it will display
"
PS
"(which means "PASS") with a long beep issued.
• LCD will display the last operating mode.
The self-test goes very fast, therefore the first 2 could not be
seen.
2) After the autotest has been carried out LCD will steadily show
the following data:
• The channel number (2 numeric characters).
NOTE: About 0.5 second after user selected a new channel or
he changed operative mode, the last status (Last channel and/or
operative mode) is automatically saved. The Radio is turned on
English