Alan HP446, Руководство пользователя

Страница: 31 / 47

Setup 7
Setup
Unpacking
The following items are in the package:
(a) Transceiver’s main body (with rubber flexible antenna)
(b) Battery pack NiMH 1,300 mA/h
(c) Standard battery charger composed by:
• Base
• AC adaptor
(d) Belt clip
(e) User’s guide (this book!)
If something is missing please promptly advise your supplier.
Installing/removing the battery pack
To install the battery pack:
1) Hold the transceiver’s body with one hand and the battery pack
with the other. Put the battery pack onto the bottom of the
transceiver.
2) Gently push the battery pack
toward the transceiver’s back
edge.
3) At the end you will hear a click:
the battery pack will snap into
place and should be firmly locked.
English
To remove the battery pack:
1) Press the battery release button
located in the back of the battery
pack.
2) Keep the button pressed and gently
pull the battery pack away from the
transceiver back edge (the opposite
operation of the previous step 2).
3) Remove the battery pack by
separating it from the transceiver’s
body.
Installing/removing the belt clip
The supplied belt allows you to hang the transceiver up to your belt
or jacket when you are not using the radio and you are just in stand-
by condition (ready to receive calls).
To fit the belt clip onto the transceiver’s body:
1) Just gently slide the clip into the
appropriate guides located in the
transceiver’s back until it firmly
locks.
To remove the belt clip:
2) Press the belt clip spring;
3) Reverse the over stated step 1.
Slide down
Push down
Push down
Lift up
Slide down
Lift up Push