16
Selcall and CTCSS/DCS Operation Reception
Selcall and CTCSS/DCS Operation
Reception
D
uring CTCSS/DCS and Selcall operation the radio may be set-up
so that the appropriate CTCSS/DCS and Selcall decoder enables the
speaker. Speaker will remain muted until the correct CTCSS tone,
the correct DCS code and/or the appropriate selective call is received.
In case of unmuted speaker, the message will be heard, the status
LED will glow green and the receive icon will be displayed. Moreover
the strength level of the received signal is displayed
(as many
are the bars as stronger is the received signal). The CTCSS/DCS
reception is indicated by the
icon; the Selcall reception is indicated
by the icon
.
Transmission
Sending a Selcall
You can send a selective call in many different ways which make easy
and quick sending your calls depending to your need: Stored call,
Who-has called call, Manual call and One touch call.
2
One or more of these modes can’t be available depending on the
previous programming set up by your radio network administrator
or dealer. Please contact them for further details.
To unlock the radio:
1) If the radio is in Partial lock then press the MENU key: the display
will read
PIN
.... else go directly to point 2.
2) Enter the PIN (four digits): the radio will be unlocked.
2
If you entered the correct pin then the radio will return to normal
operation mode; if you entered the wrong pin radio remains locked.
English