English
6
the radio will stop in correspondence with the channel selected
during the programming phase (the priority or default channel)
and automatically enable the transmission mode. Scanning is
automatically resumed as soon as you release the PTT key.
To end the channel scan
, repeat the operations described above.
The green
mon/sCAn
LED switches off.
8.1.b Temporarily stopping the scanning
If the channel scan stops in correspondence with an interesting sig-
nal, press the
f key
(or
) linked to the temporary stop feature.
The scanning feature stops in correspondence with the channel,
which is permanently displayed on the screen.
To resume the channel scan, perform the operations described
above.
8.1.c Temporary exclusion of channels from the channel scan
If the channel scan feature tends to frequently stop in correspond-
ence with one or more channels that you are not interested in, you
can temporarily exclude them from the scan list bypressing the
f
key (or
) linked to the exclusion feature.
The channel is temporarily removed from the scan list and the scan-
ning operation is continued on the remaining channels.
2
The channels excluded from the scan will remain in this status
until the radio is switched off and will be reinserted into the list
when the radio is switched on again.
8.2 Quick selection of the main channel
If the radio link provider has linked one of the
f
keys (or
) to this
feature, you can press this key to quickly select the channel you use
more frequently and configure it as main channel.
8.3 Talk Around
If you are using a repeater and a fault occurs, you can use the Talk
Around feature to continue communicating with neighbouring sta-
tions, thus bypassing the repeater (i.e. by communicating in isofre-
quency through the repeater output). To enable this feature:
1) Select a semiduplex channel (the Talk Around feature can be
enabled only for semi-duplex channels).
2) Press the
f
key (or key
) linked to this setting. The green TA
LED switches on to indicate that the Talk Around feature has
been enabled.
To disable the Talk Around feature, repeat the operations described
above. The green TA LED switches off.
I
Always remember to disable the Talk Around feature after
talking, otherwise you will not be able to use the repeater
after it resumes operation.
Содержание HM06 Series
Страница 1: ...English...
Страница 2: ...Copyright 2006 by CTE International Italia All rights reserved...
