background image

OPERATION

VERSA PRO   03/09

Operation Section 4-36

© 2009 Alamo Group Inc.

OPERA

T

ION

Make sure that all tractor flashing warning lights,

headlights, and brake/tail lights are functioning

properly before proceeding onto public roads.  While

newer model tractors have plenty of lighting to

provide warning signals and operating lighting, most

older models are only equipped with operating lights.

Consult an authorized tractor dealer for lighting kits

and modifications available to upgrade the lighting on

older tractor models.

    OPS-U- 0021

When operating on public roads, have
consideration for other road users. Pull to the side
of the road occasionally to allow all following traffic
to pass.  Do not exceed the legal speed limit set in
your country for agricultural tractors. Always stay
alert when transporting the tractor and implement
on public roads. Use caution and reduce speed if
other vehicles or pedestrians are in the area.

 OPS-

U- 0022

Reduce speed before turning or applying the brakes.
Ensure that both brake pedals are locked together
when operating on public roads.

   OPS-U- 0023

Содержание 803350C









































































































































































Отзывы: