manualshive.com logo in svg

Alamo Industrial RX60, Руководство оператора

Поделиться
Скачать
Alamo Industrial RX60 Скачать руководство пользователя страница 46

ASSEMBLY

RX60/72/84   10/12

Assembly Section 3-2

© 2012 Alamo Group Inc.

ASSEMBL

Y

DEALER SETUP INSTRUCTIONS

The mower as received from the factory is partially assembled and requires minimum time to complete
assembly and is ready for sale.

This mower is shipped vertically with shipping brackets. These shipping brackets are intended for use in
transporting the mower from the factory to dealer. 

DO NOT

 use these brackets to store the unit. 

DO NOT

 store mower vertically, the mower

can fall over resulting in serious injury or death. To avoid injury always store mower lying
down on flat ground.

Assembly will be easier if components are aligned and loosely assembled before tightening hardware. Refer to
bolt torque chart in Maintenance Section. All bolts are grade 5 unless otherwise specified.

PULL TYPE (RX84 ONLY) INSTRUCTIONS

The standard Pull-Type Unit will be shipped from the factory in the following bundles: 1) Basic Assembly, 2)
Jack shaft Assembly, 3) Jackshaft Bearing Support, 4) Gearbox Protective Shield, 5) PTO Driveline, 6) Tongue
Assembly, 7) Control Rod Bundle, 8) Axle Arm Bundle and Lift Lug and or Spring Assembly, 9) Wheels, 10)
Jack, 11) Operator’s Manual and Flat Blades. Other optional bundles that may be shipped with your unit:
Ratchet Lift Screw or Hydraulic Cylinder with Hydraulic Hose and Hose Bracket, Puncture-Proof tires or 14” or
15” Wheels, Chain Guards. Extra Equipment items include: Chain Guards, Solid Guards, Dual Wheels, Hitch
and Spring Assembly (Axle).

The Components of these machines are quite heavy. Block all components up securely
before working under or putting extremities under such parts.

Содержание RX60







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды