Alamarin Jet IO, Руководство по эксплуатации и обслуживанию

Страница: 35 / 48

Maintenance
Operation and maintenance manual IO
IO/000/EN/1.3.0 31
3. Close the drain plug and fill the reservoir with new oil. For oil
recommendations, please refer to appendix 1.
Oil recommendations
, page
39.
This prevents air from drifting into the system and ensures that lubrication
functions well from the start.
4. Remove the reservoir return hose (figure 19, point D) and keep it below
the reservoir.
This way the oil drains out from the bearing housing and the hoses and the
system fills up with new oil. The time it takes to drain the oil depends on
the installation. The colour of the oil indicates whether all the old oil has
drained out. The system’s volume depends on the length of the hoses.
5. Attach the oil return hose to the reservoir once the system is filled with
new oil.
6. Check the oil level from the dipstick on the reservoir cap (figure 19, point
B).
When the shaft starts to rotate, the system generates pressure into the
return line, causing oil to start circulating in the system.
7. It is recommended to also replace the oil filter in connection with an oil
change.
4.2. Replacing the oil filter
1. Open the screws on the oil reservoir cover (figure 19, point A) and remove
the cover.