Unpack your panel and accessories from the kit. Plug in the panel connetor
to your dimmer-unit. Use the extansion in between if needed. IPlug in your
dimmer-unit to a power outlet. Instead of using the power outlet, there’s
an integrated V-Mount or Gold-Mount plate on top of the dimmer. You can
use batteries from 12-30V DC.
Just note that you need batteries which can handle the power draw of 200
watts from the panel. There’s a simple calculation for that:
If you are using 14.8V batteries you need at least a working current of
13.5A. If your battery is rated at 14.8V and 200Wh/13.5Ah with a working
current of 13.5A you can run your BI-FABRIC 4 for one hour.
For any further questions about using our products please refer to our cus-
tomer service or watch the instructional videos on
www.aladdin-lights.com
or
YouTube
.
START-UP GUIDE
1
1
Metal corner (can be attached to magnets)
2
Metal ring for mounting (can be attached to magnets)
3
Velcro
4
Connector
POWER DRAW (W)
= MIN. WORKING CURRENT (A) =
BATTERY VOLTAGE (V)
200 (W)
=
13.5 (A)
14.8 (V)
1
3
2
4
