AL Tech Mediagate MG-250HD, Руководство пользователя

Страница: 22 / 49

1.3.4 Linux
9
Support A
vailable on Linux 2.4
or
higher.
[Automatic Mount]
After booting, log-in.
Connect
the
MG-250HD -> Power On MG-250HD -> Check the detection with [fdisk] -> make Mount Pointer (ex. mediatest) at Folder
Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
/dev/sda /mnt/mediatest vfat noauto, user 0 0 (in case of
a
FAT32 HDD)
/dev/sda /mnt/mediatest ntfs noauto, user 0 0 (in case of
a
NTFS HDD)
Log-in again.
9 above example “sda” is assumed that the MG-250HD will be detected as “sda” on your system. If not, you have to write the drive name
which is detected as “USB Mass Storage
"
, not “sda
.
”
[Manual Mount]
Connect
the
MG-250HD -> Power On MG-250HD -> Check the detection with [fdisk] -> make Mount Pointer (ex. mediatest) at Folder
Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
mount –t vfat /dev/sda /mnt/mediatest (in case of FAT32 HDD)
mount –t ntfs /dev/sda /mnt/mediatest (in case of FAT32 HDD)
9 above example “sda” is assumed that the MG-250HD will be detected as “sda” on your system. If not, you have to write the drive name
which is detected as “USB Mass Storage,
"
not “sda
.
”
[How to stop using]
Do
a
[unmount] at Device Control.
1.3.5 Mac
9
Support
available on Mac 9.0
or
higher.
There is n
o need to install the installation driver
on
Mac OS 9.x version
,
the MG-250HD will be detected automatically. If the MG-250HD is
detected correctly, an icon appear
s on the
monitor.
When removing MG-250HD safely, drag the icon to
the
trash and unplug
the
MG-250HD.
21