Startup
474 910_b
15
Snow clearing tips
Clear snow right after it has fallen. If you wait
too long, the lower layer will ice up and make
clearing it more difficult.
Clear the snow so that each pass overlaps
slightly.
If possible, clear the snow in the direction of
the wind.
Inspecting the machine
Perform a visual inspection each time before
operating.
Check safety devices, operating elements,
cables and all screw connections for damage
and tightness.
Replace damaged parts before operating.
Adjusting the machine to your body height
see Figure 6
1. Fold up the handle adjustment locks on both
sides.
➯
The lock catches can now be seen.
2. Adjust to the desired height.
3. Fold down the handle adjustment locks on
both sides.
Adjusting the throwing direction and width
CAUTION!
Risk of injury due to uncontrolled exit-
ing foreign objects!
Never aim the discharge chute in the di-
rection of people, animals, windows, au-
tomobiles or doors.
Adjusting the throwing direction
1. Move the discharge chute to the desired po-
sition by turning the crank.
Adjusting the throwing width
1. Loosen the discharge height lock to adjust the
flap higher and vice versa.
2. Tighten the lock nut again.
➯
The more steeply the flap is adjusted, the
higher and further the snow will be ejec-
ted.
Establishing the the power connection
see Figure 7
1. Insert the mains plug of the machine connec-
tion line into the switch-plug combination.
2. Secure the machine connection line with the
cable strain relief.
➯
The loop of the mains cable must be long
enough so that the cable strain relief can
glide from one side to the other.
ADVICE
The machine connection must corre-
spond to at least the standard H07RN-F
and not exceed a length of 50 m.
This is a flexible, rubber cable for me-
dium mechanical requirements in dry,
moist and wet rooms as well as outdoors.
Switching on the machine
Start the machine on level ground only. The
ground must be free of foreign objects. Do not lift
the machine when starting.
see Figure 8
1. Hold the start button of the switch-plug com-
bination pressed.
2. Pull the safety bar against the handle and hold
firmly.
3. Release the start button.
Switching off the machine
1. Release the safety bar.
2. Wait for the motor to come to a standstill.
Overload protection
If the snowblower becomes blocked by ingested
foreign objects, the overload protection will trig-
ger.
1. Disconnect the machine from the mains
power.
2. Allow the motor to cool.
3. Carefully remove any foreign objects.
4. Connect the machine again to the mains
power supply.
After pressing the overload protection, the snow
blower starts working again.
MAINTENANCE AND CARE
Maintenance schedule
Before each use
Perform a visual inspection each time before
operating.
Check safety devices, operating elements,
cables and all screw connections for damage
and tightness.
Replace damaged parts before operating.
After each use
Clean discharge chute, auger, handles and
housing.
Содержание Snowline 46E
