GB
Translation of original user instructions
28
Petrol lawnmower
Starting the motor
Caution - risk of poisoning!
Never leave a motor running in an enclosed
space.
Caution - Risk of injury!
Do not tilt the lawnmower while starting.
▪Start the motor only when the blade is mounted
(the blade acts as a flywheel mass)
▪If starting the motor when hot do NOT use the
choke or primer button
▪Do not change the motor controller settings
Do not start the equipment if the outlet shaft is not
covered by one of the following parts:
Grass catcher
Deflector plate
Mulch kit
Be particularly careful when operating the starter
switch - follow the manufacturer's instructions
Keep your feet at a safe distance from the cutting
gear
Start the lawnmower where the grass is shorter
Position symbols on the equipment:
Choke*
On Off
Remote throttle
control*
Start Stop
Remote throttle
control with
choke*
Vario transmis-
sion*
Fast Slow
Blade coupling*
On Off
* depending on version
Setting the handle height (optional)
Knob adjustment
1. Press and hold both knobs on the handlebar and
select the desired position (
12/1
).
2. Release the knobs to lock the handlebar in position.
Clamp adjustment
1. Hold the bar and loosen both clamps (
12/2
).
2. Move the bar to the desired position
3. Lock the clamps.
Mowing with the side outlet duct (optional)
Caution - risk of injury!
Attach/detach the side outlet only when the motor
is switched off and the mower blade has come to
a standstill.
Inserting the side outlet
1. Remove the grass catcher and insert the mulch kit.
2. Fold up the side outlet cover and hold it (
11/1
).
3. Insert the side outlet duct (
11/2
).
4. Slowly close the cover.
The cover holds the side outlet duct and prevents
it falling out.
Removing the side outlet
1. Fold up the side outlet cover and hold it (
11/1
).
2. Remove the side outlet and close the cover
(
11/2
).
