Translation from the original operating instruction
18
AL-KO AIR HEATER COMFORT
Device Version K/TA and KE/TA
The K/TA and KE/TA device version is well suited for gate air curtain systems, due to its conical outlet hood. This device
version should be mounted as close as possible to the gate openings. The recirculated air is taken in at the ceiling on all
four sides, heated and blown downwards into the room against the intake direction. The air heater can either be mounted
directly under the ceiling or fastened at a distance to the ceiling with Console Set a or c (optional).
Max. permitted distance from the floor to the bottom edge of the device:
Type 140-K/TA =
2500 mm
Type 140-KE/TA =
4000 mm
Type 250-K/TA =
3000 mm
Type 250-KE/TA =
4500 mm
Type 400-K/TA =
3500 mm
Type 400-KE/TA =
5000 mm
Type 650-K/TA =
4000 mm
Type 650-KE/TA =
5500 mm
Mount the bracket set on the air heater (if it was not pre-installed at the factory)
Drill fastening holes into the ceiling.
Attach the air heater to the ceiling.
Establish the media connections.
Example for ceiling mounting:
Max. permitted floor
distance must be considered
Max. permitted floor
distance must be considered
Fig.: Installation example for Device Version K
Fig.: Installation example for Device Version K/h
Fig.:
with Console Set c
Max. permitted floor
distance must be considered
min. 150 mm
Max. permitted floor
distance must be considered
h
h/4
approx. 100
max.
30°
Fig.: Installation example for Device Version K/o
Fig.: Installation example for Device Version K/TA; KE/TA
Fig.:
with Console Set a
Fig.:
Fig.:
