AL-KO KHS 3700, Руководство пользователя

Страница: 16 / 127

GB
Log splitter
Malfunctions
Switch off the log splitter and pull out the mains power plug in the event of malfunctions occurring. Engage a specialist firm or
workshop to remedy malfunctions that cannot be rectified on the basis of the following table.
Malfunction Cause Remedy
The log pusher does not move
out/in Too little hydraulic oil Top up hydraulic oil
Hydraulic pump is defective Replace hydraulic pump
The splitter is inclined towards the splitting
wedge Position the splitter on a horizontal plane or
inclined towards the operating lever
The log pusher does not exert
any force Too little hydraulic oil Top up hydraulic oil
The splitter is inclined towards the splitting
wedge Position the splitter on a horizontal plane or
inclined towards the operating lever
Hydraulic pump makes a
whistling noise, the log pusher
moves with a jerking motion Too little hydraulic oil Top up hydraulic oil
The splitter is inclined towards the splitting
wedge Position the splitter on a horizontal plane or
inclined towards the operating lever
Air inside the circulation system Open the venting screw
Motor becomes excessively hot Cable cross section is too small Use cable with larger cross section
Motor is not starting Thermostatic switch has switched off Wait until the motor has cooled down
Mains plug or socket is defective Let an electrician check the plug
Cable is defective Replace by an electrician
Electric motor is defective Let an electrician check the motor
Environmental protection, disposal
Do not dispose of old units in household waste!
The packaging, unit and accessories are made of materials that can be recycled and should be disposed of
in a suitable manner.
GB 5 Translation of original user instructions