AL-KO GT 2000 Скачать руководство пользователя страница 39

Страница: 39 / 364

442601_a

Working behaviour and working technique (07 – 09)

3. Hold auxiliary handle (05/1) in one hand and

upper grip (05/2) in the other hand.

4. Press (05/a) the safety button (05/3) in the

upper grip (05/2).

5. Press and hold (05/b) the On/Off switch

(05/4) in the upper grip (05/2). The tool starts.
The safety button (05/3) can be released.

6. Allow the lawn trimmer to run at idling speed

for a few moments. This causes the cutting
line to be cut off to the correct length.

7. The appliance switches off when the ON/OFF

switch (05/4) is released.

WARNING!

Danger of cutting injuries

After the appliance has been switched
off, the spool head continues to rotate
for a few seconds. Reaching into the
spool head during this time can result in
cutting injuries.

■

Wait until the spool head has come
to a complete standstill.

WORKING BEHAVIOUR AND
WORKING TECHNIQUE (07 – 09)

■

Switch on the appliance before approaching
the grass to be cut and then lower slowly to
avoid overloading.

■

Tilt the appliance slightly forwards (approx.
30°) to mow with the tip of the cutting line.
Walk forwards slowly (07).

■

When mowing, swivel the appliance evenly to
the right and left (07).

■

Long grass must be mown in several passes.
Always proceed from top to bottom (09).

■

The appliance cuts best at very high speed.
Therefore, do not overload the appliance by
cutting long grass.

■

If the appliance is overloaded in long grass,
the line will be blocked. Immediately lift the
appliance so it releases. Otherwise, the mo-
tor could be permanently damaged.

■

Do not move the appliance directly against
hard obstacles (e.g. walls), but mow side-
ways. This protects the cutting line (08).

■

Keep the appliance away from delicate
plants. Fold the plant protection bar into the
horizontal position.

MAINTENANCE AND CARE

WARNING!

Danger of lacerations

Danger of cutting injuries when reaching
into sharp-edged, moving appliance
parts and into cutting tools.

■

Before maintenance, care and
cleaning work, always switch off the
appliance. Remove the recharge-
able battery.

■

Always wear protective gloves
during maintenance, care and clean-
ing work.

NOTE

Repair work is only allowed to be carried
out by expert workshops or our AL-KO
service centres.

■

Do not get the appliance wet or expose it to
moisture. Do not spray with water.

■

After each use, clean the housing and cutting
blades with a brush or cloth. Do not use wa-
ter and/or aggressive cleaning agents or sol-
vents - risk of corrosion and damage to the
plastic parts.

■

After every use, remove the rechargeable
battery and inspect the appliance for dam-
age.

■

Do not use the appliance if the blade of the
line cutter is missing or damaged.

■

Always keep the guard plate, spool head and
motor clear of mowing residues.

■

Inspect all bolts for tightness.

■

Inspect the electrical contacts of the appli-
ance for corrosion, clean with a fine wire
brush if necessary and then spray with a con-
tact spray.

8.1

Changing the spool (06)