GB
17
470 602_a
2200 E / 2400 E
Wear appropriate working clothes:
Safety glasses
Protective gloves
Ear defenders
Face mask for dust protection
Sturdy footwear
Long trousers
Keep the following items away from the suction
intake:
Loose hanging clothing
Jewellery
Long hair
Keep all cooling air inlets clear of rubbish.
Never blow rubbish towards people.
Assembly
Warning!
Do not use the machine until it has been fully
assembled.
Fitting the carrying handle
Insert the square nut into the carrying handle
1.
(
2
).
Push the carrying handle on to the housing (
2.
3
).
Set the carrying handle to the desired position.
3.
Insert the bolt (M6×100) into the carrying handle
4.
(
4
).
Tighten the carrying handle bolt.
5.
Fitting the changeover lever
Place the grip piece in position (
1.
5
).
Insert the bolt (Ø 3.5 × 16) into the grip piece.
2.
Tighten the grip piece bolt.
3.
Fitting the collection sack
(
6
)
Place the collection sack belt over the support pin
1.
on the sack frame and place it around the sack
frame collar.
Ensure the locking bracket engages in the eye of
2.
the collection sack belt (
7
).
Carefully tighten the collection sack belt using the
3.
nut and bolt (M4×30) (
7
).
Fitting the pre-separator
Slide the lower edge of the pre-separator into the
1.
sack frame (
8
).
Click the upper edge of the pre-separator home in
2.
the sack frame (
8
).
Fitting the sack frame
Hook the sack frame on to the suction duct stub
1.
(
9/1
).
Pull the sack frame upwards slightly (
2.
9/2
).
Allow the carrying handle to click home into the
3.
housing (
10
).
Fitting the carrying strap
Insert the carrying strap carabiner hook into the belt
1.
retainer on the machine (
11
).
Adjust the belt length so that the machine can be
2.
guided just clear of the ground.
Only for Blower Vac 2400 E speed control:
3.
Place the belt padding around the shoulder area of
the carrying belt, and close the Velcro fastening.
Fitting the rollers
Push the left and right rollers on to the roller carrier
1.
until they click home (
19, 20
).
Insert the roller carrier into the slot on the underside
2.
of the sucking / blowing duct until it clicks home
(
21, 22
).
