25
GB
474 184_a
25
D
Lock guide handle
1
in desired lock position
5
by
hand-tightening the two clamping levers
7
on both
sides.
Ensure that the teeth engage properly.
Inserting battery
Caution, risk of injury from rotat-
ing and sharp cutting equipment!
Figurers
E
–
G
E
Open battery cover
17
. To do so, slightly press 1 x
on cover (see illustration).
Ensure that contact plug
20
is dry and free from any
contamination. When inserting the battery
19
do
not use force.
F
Push battery
19
with slight pressure to stop in bat-
tery compartment
18
. Contact socket of battery
must be firmly positioned in contact plug
20
of
mower.
G
Close battery cover
17
. When battery is in correct
position, cover must be easy to close. Battery cover
17
locks into position with a "click".
Setting of cutting height
Caution, risk of injury from rotating cutting
equipment!
Set cutting height only when motor
is switched off. Set cutting height only low
enough for cutting equipment not to touch any
uneven ground.
Place mower on solid, flat surface.
Figure
H
With cutting height adjustment
15
, seven settings are
possible.
H
To set cutting height, slightly lift the mower with the
handle
10
. Pull cutting height adjustment
15
from
lock position, move cutting height adjustment
15
into
desired position and reengage.
For easy operation, cutting height adjustment
15
is spring-loaded.
The scale on cutting height adjustment
15
indicates
approximate cutting height:
Level 1*
= 1,6 cm
Level 2
= 2,5 cm
Level 3
= 3 cm
Level 4
= 4 cm
Level 5
= 5 cm
Level 6
= 6 cm
Level 7
= 7 cm
*
This position is only suitable for decorative lawns and
particularly level areas.
Start-up
For your safety
It is essential that you also follow the
“General safety
instructions“
as well as the
“Safety instructions for
operation of mower”
in chapter
“Important safety
instructions”
.
Caution, mower protection!
Ensure that grass catcher
9
is in place.
When mowing, always wear suitable work
clothes, such as sturdy shoes, long pants and
possibly gloves. Never mow while barefoot or
wearing thin sandals.
Switching mower on / off
Switch on: Figure
I
I
Connect circuit breaker
12
. In doing so, mower
should be on level ground, with all 4 wheels touch-
ing the ground.
To start, push safety release button
3
and with other
hand pull safety start lever
2
against guide handle
1
. After motor starts running, let go of safety release
button
3
.
Motor starts running with a soft start. Should it be
difficult to start motor, release safety start lever
2
.
Reason for this could be that grass around mower
is too high. If this is the case,tilt mower downward
via rear wheels (guide handle
1
), though only as
much as absolutely necessary. Restart motor.
Should it still be difficult to start motor, or should
it lock, please see information in chapters
“How
to mow your lawn correctly“
or
“Trou-
bleshooting“
.
max. 45 °C
STOP
Содержание 112774
