9
Note
: the two digits display of temperature is not taken into account in the whole
number of the digit displays.
How to set the number of the digit displays:
The number of the digit displays is stored in the settings memory, so you need to
set this number whenever you replace the settings memory, this can be achieved as
follows:
Count the digit displays in AL-Muakkita except the temperature display.
Press the (
) and (
) keys simultaneously, release the (
) key first and
continue pressing the (
) key until the number /
29
/ is displayed on the Iqama
display.
Use the (
) key to set the digit displays number then press (
).
Press the (
) key to return back to the normal operation mode.
The displays test:
The displays test mode is to check all the displays operation; you can enter to this mode
as follows:
Press the displays test key (
) or.
Press the reset (
) and (
) key simultaneously, release the (
) key first then
the (
) key, AL-Muakkita starts the test program which is an incremental count (
0
…….
9
) on all the displays.
You can pause the incremental count any time by pressing (
) to check the
displays status, to resume the incremental count press (
).
During the incremental count, press the Iqama key (
/
) to see the city file number
on AL-Duhr display.
Press (
/
) or (
) to return back to the normal operation mode.
If the numbers didn't appear correctly, contact the sales agent or the authorized
maintenance agent.
