Installation
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: +49 (0) 511 16 59 672-0 · www.akytec.de
9
4 Installation
CAUTION
Improper installation
Improper installation can cause serious or minor injuries and damage the control panel.
Installation must be performed only by fully qualified personnel.
For the dimension drawings see Appendix A.
4.1 Requirements
– The device is designed for front mounting.
– The mounting panel must be accessible from both sides.
– A rectangular mounting cutout is required.
– The mounting enclosure must provide a clean, dry and controlled environment.
– The seal contact surface must be clean and smooth, so that the protection IP64 can
be provided.
– The mounting panel can be placed at any angle.
– The device has been designed for natural convection cooling. Make sure that the
cabinet provides sufficient clearance for natural convection.
4.2
Mounting
Mounting sequence:
– Make a cutout in the mounting panel for the device
– Make sure that the device is provided with the mounting seal.
– Fit the device into the cutout
– Insert the 4 fastening clips into the slots on the top and the bottom of the device.
– Insert the screws and tighten them to fix the device.