AKX AKX-CH4-1BAM, Руководство пользователя

Страница: 5 / 8

OWNER's GUIDE
5
www.autokinetix.com © Automotive Data Solutions Inc.
DiagnoStics
Your vehicle didn’t remote start? Count your parking light flashes for a system diagnostic and
apply the listed solution.
# OF PARKING
LIGHT FLASHES
DIAGNOSTIC SOLUTION
3 + 1 Engine is already running Turn engine OFF
3 + 2 Key in ignition at ON position Remove key from ignition
3 + 4 Trunk is open Close trunk
3 + 5 Foot brake is ON Release foot brake
3 + 6 Hood is open Close hood
3 + 8 Tach failure Contact Authorized Dealer
3 + 10 System is in Valet Mode Exit Valet Mode
3 + 11 Can communication failure Contact Authorized Dealer
3 + 12 Remote starter not synced Perform System Sync Procedure
SySTEM SyNC PROCEDURE
Step 1 Start engine with key
Step 2 Let engine run for at least 15 seconds
Step 3 Turn engine OFF
For any additional assistance, contact your Authorized Dealer.
when servicing your vehicle
To ensure safety during vehicle servicing the remote starter must be placed in ‘Valet Mode’.
The ‘Valet Mode’ will disable remote start functionality. To activate or deactivate the ‘Valet Mode’,
follow the instructions below:
COMMAND ACTION
# OF PARKING
LIGHT FLASHES
Activate Valet Mode Cycle ignition ON/OFF 5x rapidly 2 + 1
Deactivate Valet Mode Cycle ignition ON/OFF 5x rapidly 2 + 2