2
Installation Instructions
General:
01905 823 298
|
www.akw-ltd.co.uk
AKW wastes are designed for low maintenance and reliable operation. The trap valve is located inside
the waste body should be checked as part of a planned maintenance programme.
Keeping your wastes clean
This product should be cleaned periodically to remove any accumulation of hair or other waste
material, using normal domestic bathroom cleaning materials. To clean the waste trap, first remove the
cover to gain access.
Disinfecting
Where disinfecting is necessary, standard procedures for disinfecting equipment should be used,
taking due care and attention to the warning signs concerning possible effects of aggressive
chemicals on plastics. After cleaning, always flush down with water then wipe thoroughly with
a damp cloth to remove any cleaning material residues before drying. Do not use strong or
concentrated acidic, alkaline or other cleaning materials as these may discolour or otherwise
damage the product. Do not use abrasive cloths.
Contents
Contents
GW90 with a cover (25404)
Onyx GW90 no cover (25494)
Outlet Pipe & Nut
Outlet Pipe & Nut
Waste Main Body
Waste Main Body
Waste Trap
Body
Waste Trap
Body
Cover
Locking
Ring
(B)
Locking
Ring
(B)
Locking Ring
Seal (A)
Locking Ring
Seal (A)
