Akuvox A02 Access Control Terminal Admin Guide
30
12.4 Unlock by Exit Button
When you need to open the door from inside using the exit button installed by the door, you
can configure the access control terminal Input to trigger the relay for the door access. To
configure the configuration on web
Access Control > Input
interface.
Parameter Set-up:
•
Trigger Electrical Level:
select the trigger electrical level options between
High
and
Low
according to the actual operation on the exit button.
•
Action to execute:
set actions to be triggered by the input. Email and HTTP URL
actions are supported.
•
HTTP URL
: to set HTTP URL.
•
Action Delay:
set the action delay timing (ranging from 1-300 Sec.) For example, if
you set the delay time as
5
. Then the action will not be triggered until 5 seconds after
the input status changes.
•
Execute Relay:
set up relays to be triggered by the input.
•
Door Status:
display the status of the input signal.
12.5 Unlock by PIN Code
A02 supports opening the door via pin code. You can set up a PIN code on the
Directory >
User,
click
Add
, then type in the private PIN code.
Содержание A02
Страница 1: ......
Страница 53: ...Akuvox A02 Access Control Terminal Admin Guide www akuvox com 53 ...