Akuvox A02 Access Control Terminal Admin Guide
15
Note
• You can only set the NTP-related parameter after you enable the automatic
date and time.
•
Automatic Date&Time Enabled:
if enabled, the device will update the time
automatically via the NTP server (Network Time Protocol). Disable it if you want to
set up the time manually.
•
Time Zone:
select the specific time zone based on where the device is used. The
default time zone is GMT+0:00.
•
Preferred Server
: enter the primary NTP server address you want to update the time
with. The default NPT server address is 0.pool.ntp.org
•
Alternate Server:
enter the backup NPT server address you want to update the time
with when the primary one failed.
•
Update Interval:
set the time update interval. For example, if you set it as 3600s, then
the device will send a request to the NPT server for the time update once every 3600
seconds.
•
Current Time:
display the current device time.
•
Date/Time
: set the date and time for the device manually when you disable the
automatic date and time service.
Содержание A02
Страница 1: ......
Страница 53: ...Akuvox A02 Access Control Terminal Admin Guide www akuvox com 53 ...