The board is equipped with Velcro fastenings (3) which allow to install it to SECTOR 4 Panel Grip in place of the power supply. To secure the plate with Velcro strip, unscrew the V-Lock socket fixing screws (4),
insert and fasten the Velcro strips underneath the socket and then tighten the socket again.
Due to the significant power, we do not recommend using low capacity batteries.
Inside the PCB, there is a slightly warm electronic system which raises the voltage, so it is necessary to ensure free air flow through the ventilation slots (2) in the plate body.
4.
SECTOR V-Lock Power Plate
for SECTOR Controller
The plate allows the SECTOR controller to be powered from a V-Lock battery. To do this, connect the cable (1) to the SECTOR power supply socket and plug a charged battery into the V-Lock socket.
2
2
Photo 5
SECTOR V-Lock Power Plate
1
3
4
4
4
4
3
tel. +48228636433 • [email protected] • www.akurat.lighting
All components of SECTOR system have been designed and are manufactured in Poland by:
Akurat Lighting Sp. z o.o. • ul. Akurat 6, 02-488 Warszawa, Poland • KRS 0000449843 • VAT PL6342815487 (production and service: ul. Krakusa 11, 05-802 Pruszkow, Poland)
S E C T O R
