Akura ATL1930W-ID, Инструкция по эксплуатации

Страница: 16 / 31

Timer
:
press the VOL
+
button to
enter the timer menu as the following picture.
Channel
Move Select Exit
CURRENT
TURN OFF
TURN ON
TURN ON PROGRAM
00
:
00
_ _:_ _
_ _:_ _
1
7
.
5 PC menu
( )
This menu can only be used in PC Mode
Clock
:
adjust the pixel clock frequency
,
until the image size is maximized for the screen
.
Phase
:
adjust the phase of the ADC sampling clock relative to the sync signal
,
until a stable
image is obtained
.
H
/
V
.
Position
:
adjust the
transverse/vertical position of the screen.
Auto
: press the button to setup the parameter of the screen automatically.
CURSOR RIGHT
PC
Move Select Exit
Clock
Phase
H
.
Position
V
.
Position
Auto
You MUST set the Select Current Time by pressing the CH+/- buttons, to select the “HOURS”
press CURSOR RIGHT and CH+/- to change the time. Press CURSOR RIGHT to select
“MINUTES” and CH+/- buttons to set the time.
To set the “OFF” and “ON” times Select using the CH+/CH- buttons, set the times required as you
did setting the time. If you want the Tv to switch to a particular station select “TURN ON
PROGRAMME” using the
CH+/- buttons and change using the CURSOR LEFT
/
RIGHT buttons,
the TV will then switch at the requested time.