Akura ASW8411-250, Руководство пользователя

Страница: 21 / 39

19
Timer Recordings cont..
Press and you will see the table below.
Use the Cursor buttons to select SOURCE press
.
Use the Cursor buttons to select the programme station or input and
press
Use the Cursor buttons to select RECORD To and press
Use the Cursor buttons to select HDD or DVD and press
Note :-If you select DVD ensure there is a disc that can accept the
recording in the disc tray.
Use the Cursor buttons to select QUALITY and press
Use the Cursor buttons to select the quality and press
Use the Cursor buttons to select MODE and press
Use the Cursor buttons to select the mode and press
Use the Cursor buttons to select DATE and press
Use the Cursor buttons to change the value of each digit and
press
Use the Cursor buttons to select START and press
Use the Cursor buttons to change the value of each digit and
press
Use the Cursor buttons to select END and press
Use the Cursor buttons to change the value of each digit and
press
Use the Cursor buttons to select TITLE and press
.
Use the Cursor buttons to select each letter (up to 8 letters) and press
.
Use the Cursor buttons to select PDC (Programme Delivery Control) and press
. Use the Cursor buttons to select
ON /OFF and
press (Note. Only 8 programmes may be recorded at this time if using PDC.)
PCD is a feature to ensure the recorder starts at the start of the programme if the programme schedule is delayed.
When the TIMER settings have been made press the TIMER button. To ensure the DVD Recorder starts at the appropriate time the
recorder MUST be set to STANDBY .
If you are watching a programme via the Recorder, a warning that the recording is “about to start” will be seen on the screen, if you wish
to continue with the recording you must press to switch the recorder to standby, otherwise the recording will be cancelled.
When the timed recording has been completed the recorder will switch back to standby
Note 1. While a recording on HDD is taking place and it overlaps with a “scheduled timer” recording, the recorder will prompt you to
confirm, 2 minutes before the timed recording starts. If you do not respond within a minute., the Timed recording will start as per the
schedule.
When recording on a DVD and it overlaps a “scheduled timer” recording, the recorder will prompt you to confirm within 2 minutes before
the scheduled recording, you are then notified to stop the current recording. If you do not respond the notice will disappear 10 seconds
before the recording was due to start and the timed recording will be cancelled.
Note 2. If a timer recording is taking place on HDD, you can view the programme being recorded in “Time Shift” mode, (Pause/Play, trick
play). In this mode “Save” will be disabled.
SELECT
SELECT
.
SELECT
.
SELECT
.
SELECT
.
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
.
SELECT
.
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT