7. Menu Operation.
Installation.
Should you move to another location you may need to re install the TV
channels. Select Installation and you will see the menu as in FIG 1. A full
retuning will now take place.
DTV Auto Tuning. (Fig 12)
After initial installation it may be necessary to re install all the stations
especially if new stations have been added. Select DTV SOURCE. Press
LCD MENU and select DTV Tuning menu, select Auto Tuning and press
►
. The sub menu (Fig 13) will be shown. Select YES using the
►
/
◄
buttons and press OK. The search tuning will now start and a display will
show progress (Fig 3).
When tuning is complete the TV will display the first channel (BBC1) in
DVBt mode. All received channels will be stored.
If using in another country, select COUNTRY using the
▲
/
▼
buttons and
select the country using the
►
/
◄
buttons.
ATV Auto Tuning. (Fig 14)
After initial installation it may be necessary to re install all the stations
especially if you have moved the TV to a different area. Select TV
SOURCE. Press LCD MENU and select TV Tuning menu, select Auto
Tuning and press
►
. The sub menu (Fig 15) will be shown. Select YES
using the
►
/
◄
buttons and press OK. The search tuning will now start
and a display will show progress (Fig 2).
When tuning is complete the TV will display the first channel (BBC1) in
DVBt mode. All received channels will be stored.
If using in another country, select COUNTRY using the
▲
/
▼
buttons and
select the country using the
►
/
◄
buttons.
The Analog stations are stored in station order i.e BBC1, BBC2 etc,
however in certain circumstances a station may be out of order, these
stations will need to be correctly ordered, see page 15.
As the number of areas in the UK switch to “Digital only” and “Analog”
stations are turned off, there is a possibility of the TV storing stations that
may not be the “Primary” station, this normally is shown by programmes
being missing, freezing or breaking up. To ensure you have the correct
stations tuned in you may need to refer to DTV Manual Tuning , (see
next).
DTV Manual Tuning. (Fig 16).
It may be necessary to add more digital channels as they are provided
by the programme providers or manually tune stations for reasons
(above).
Select DTV Manual Tuning and press Ok. Using the
►
/
◄
buttons select
the channel number of the multiplex (channel) required. The correct
channel numbers are available from the website
, and
select “Transmitters”. If you do not know which region you are in, go to
website
and Insert your postcode, you will then be
shown which region you are in.
At the bottom of the menu you will see a bar scale showing the quality of
the signals on that channel. Press OK to start the search. When
complete the menu will display the number of TV and Radio stations
received.
Fig 13
Fig 12
Fig 14
Fig 15
14
Fig 16
