11
8. Menu Operation
Fig 9
Fig 8
Fig 7
Time. (Fig 7).
Clock.
Once the TV is tuned to a DVBt signal the clock time is automatically set.
Off Time.
To turn the TV Off at a specially selected time.
On Time.
To turn the TV On at a specially selected time.
Sleep Time
. This may be set as follows :- Off, 10 min, 20 min, 30 min, 60 min,
90 min, 120 min, 180 min, 240 min, Off.
Auto Sleep.
This may be set to On or Off. When turned On, the TV will switch
off automatically if no signal is present after 10 minutes.
Time Zone.
The clock is able to be set to different world time zones, select the
time zone to suit.
Option (Fig 8).
Language
. English only available.
Country
. UK. This is set in the Tuning Menu (Auto Tuning).
Hearing Impaired. (Digital TV only).
Sets Subtitles when transmitted
Restore Factory Default
. Restores all factory settings. The password is required
for this feature (0000).
Lock. (Fig 9).
Lock Channel
. When this is selected you will be required to enter the password.
If this feature is selected all functions in the TV Setting menu are locked.
Change Password
. Enter a new 4 digit number and then enter again to confirm.
You MUST ensure this number is kept safe.
Block Program
. When this is selected a list of programmes is displayed, use
the
▲
/
▼
to select the programme you wish to lock and press the Green button.
A lock will be displayed by that station. You may lock as many programmes as
you wish. To unlock re select the channel and press the Green button, the lock
will be removed. Each time a locked station is requested you will be asked for the
password. Entering the password will allow that station to be viewed.
Parental Guidance
. (DVBt only). You may set the parental guidance level from
:- OFF to 18. Thus if a selected station has unsuitable material, a password will
be required.
Channel. (Fig 10).
Auto Scan.
After initial installation it may be necessary to re install all the
stations. Select Auto Tuning and press OK. The sub menu (Fig 11) will be
shown. If using in the UK select Start with the
▼
button and press OK. If using in
another country, select the country using the
►
/
◄
buttons then select Start.
The TV will now tune the entire TV spectrum (see Fig 3).
When tuning is complete the TV will display the first channel (BBC1) in DVBt
mode. All received channels will be stored, both Analog and Digital.
The Analog stations are stored in station order i.e BBC1, BBC2 etc, however in
certain circumstances a station may be out of order, these stations will need to
be correctly ordered, see page 14.
As the number of areas in the UK switch to “Digital only” and “Analog” stations
are turned off, there is a possibility of the TV storing stations that may not be the
“Primary” station, this normally is shown by programmes being missing, freezing
or breaking up. To ensure you have the correct stations tuned in you may need
to refer to DTV Manual Tuning , (see next page).
12
Fig 10
