9
Source/ Input Menu.
To access the Source menu, press the SOURCE
button on the Remote Control or the INPUT button on
the TV.
Using the
▲
/
▼
buttons select the Source / Input
required and press OK to select.
7. Connections.
9
8. Menu Operation
Connect the TV to the Mains supply and suitable aerial. It is advisable not to
connect other apparatus until you have established that the TV is working
correctly. If using the TV for DVBt (Freeview) viewing, the existing aerial may
not be suitable. Indoor aerials (set top) may not be suitable for some of the
received stations. If stations are missing, freeze or break up, it is certainly
the aerial signal that is not sufficient.
Turn on the power at the mains supply and a Red led will be displayed in the
lower right corner.
Press either the Standby button on the remote control or the Power button on
the TV.
The led will now turn Green and the screen will light up after approx 5 - 10
seconds.
At this stage no stations will be stored.
Basic Tuning
Press the LCD MENU button on the Remote Control. The menu as in Fig 1
will be shown.
Using the
▲
/
▼
buttons select “AUTOTUNING” and press OK.
Menu Fig 2 will be displayed. If you are in another country other than UK,
use the
►
/
◄
buttons to select the correct country, otherwise press
▼
to
select START and press OK.
Menu fig 3 will be displayed and when tuning is complete the TV will display
the first channel (BBC1) in DVBt mode. All received channels will be stored,
both Analog and Digital.
Fig 1
Fig 2
