Akura AAMT15LCD, Инструкция по эксплуатации

Страница: 25 / 32

Connect the Tv to your PC as described on Page 6.
Turn on the PC and the Tv monitor.Using the “Mode” button on the Remote
Control or the “Source” button on the Tv, select PC.You should now see the
PC display screen.
The Tv does not require any settings such as “Refresh mode” or “Resolution”
to be made, these are all done in the PC Setup mode.
There are, however, certain settings that may be made to your Tv in PC mode.
These are described as follows :
To enter the “LOCATION” menu Press the “Menu” button, this will show the
menu, see “fig 14”
Using the “ ” button move the highlight on the left side of the menu to “LOCA-
TION” .Press the “Menu” button to select the sub menu see “fig 15”
In most cases the “Auto Config” will be all that is necessary.
1. Press the “Menu” button to enter the Sub Menu.
2. Use the “ and
” buttons to select “Auto Config”.
3. Press the “Menu” button to start “Auto Config”. The picture displayed
will appear to move from side to side. This is quite normal, the PC and
the Tv are communicating the best setup.
PC Operation. (VGA).
Fig 14
Fig 15
22