Akura AAMT15LCD, Инструкция по эксплуатации

Страница: 24 / 32

Blue Screen.
When in “no signal” conditions, e.g, the aerial lead is unplugged, or No AV
inputs, the screen may be set to display “Blue”.
1. Use the “ and ” buttons to select “Blue Screen”.
2. Press the “Menu” button and then use the “ and ” buttons to adjust
to your requirement.
3. Press the “Menu” button once to exit that adjustment, or use the “Exit”
button once.
Input Source.
You may select the Input Source from here, as well at the “ Mode ” button on
the Remote Control or the “Source” button on the Tv.
1. Use the “ and ” buttons to select “Input Source”.
2. Press the “Menu” button and then use the “ and ” buttons to select
the source you require.
3. Press the “Menu” button once to exit that adjustment, or use the “Exit”
button once.
Sleep Time.
You may set the Tv to switch to “Sleep” at a pre determined time. This can
be set in 15 minute intervals, from “OFF” to 60 Minutes. When the Tv “times
out” it will go to standby.
1. Use the “ and ” buttons to select “Sleep Time”.
2. Press the “Menu” button and then use the “ and ” buttons to select
the time you require.
3. Press the “Menu” button once to exit that adjustment, or use the “Exit”
button once.
To exit the menu totally, press the “Exit” button twice.
21