Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Mounting the carrying handle:
To reduce the volume, the carrying handle is dismantled on a new unit.
The following accessories are included for the transport handle assembly:
1 x Carrying handle
2 x connecting screw
2 x spring washer
2 x washer
Take the carrying handle and fit it over the upper screw holes on your fan heater. Now put the spring washer over
each connecting screw. Then put the washer over the connecting screw. Now insert the screw from above through
the carrying handle into the connecting holes provided. Now tighten both connecting screws properly. Done!
