Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Overview display & remote control:
Instruction Manual:
1.) Preparation and installation of filters
The air purifier is factory equipped with all filters. First open the front filter screen by reaching into the side
ventilation slots at the upper end and pulling the filter screen forward with a slight jerk. Now remove all filters.
Remove the protective cover of the fine filters and then reinsert the filters into the unit in the correct order. When
inserting the filters, make sure that the filters are inserted correctly so that the tab with the inscription "Front" always
points forwards/outwards ! Finally, the prefilter is inserted. Make sure that all holders are properly seated in the
holding pockets. Finally the front panel is inserted again and closed.
See following diagrams / pictures:
Detailed view of fan speed
RC receiver
Fan speed adjustment button
Auto-Mode
ON / OFF button
Filter indicator
Night mode
Filter change indicator
Light sensor
ON / OFF button
Auto-Mode
Fan speed
adjustment
button
Night mode
Airsensor display
Blue = Very good
Green = Good
Purple = Polluted
Red = Not good
Filter button
(sensor adjustment)
