Ground lug (#10)
AK525RU only
R4
R3 T4
R2
T2
T3
R5
T5
T8
R7
R6
T6
T7
R8
POWER
3.3A
15V
-
+
R1
T1
12VDC OUT
- +
PAIRS 5-8
PAIRS 1-4
5
6
1
2
7
8
3
4
MultiPair Connection
The MultiPair pluggable connector is used to connect the
Aktino Compact Remote to the outside plant pairs. The
AK512RU uses one four pair connector. The AK525RU
uses two four pair connectors. Insert the tip and rings into
the connector as shown in Figure 6. Tighten screws on top
of the connector. Insert the connector into the MSPAN plug
on the back of the Compact Remote Unit (see Figure 4). The
Compact Remote Unit MSPAN cable’s shield should
generally not be connected to ground (leave open).
Figure 6 Compact Remote Unit MSPAN Pluggable
Connector
Management Craft Port
Local management craft access is through the MGMT port
on the front panel IF remote management is enabled from
the CO shelf or unit.
1)
Connect an Ethernet cable between the maintenance
computer and the Compact Remote Unit’s MGMT port.
2)
The Compact Remote Unit has a factory default IP
address of 192.168.10.2.
3)
Configure the maintenance computer’s IP address to
192.168.10.3 and Netmask to 255.255.255.0. Note the
maintenance computer’s original settings.
4)
Run AktinoView V3 using 192.168.10.2 as the IP
address for the Aktino unit. The default user name and
password is “superuser” (case sensitive).
5)
If desired, the Aktino units can now be monitored with
AktinoView. The Compact Remote Unit provides read
only capability only, system parameters cannot be
change. Note, MSPAN must be up to monitor the
system.
6)
Exit AktinoView V3.
7)
Reconfigure the maintenance computer’s IP address to
original setting.
Figure 4 Compact Remote Unit Back Panel (AK525RU shown)
Replaceable Air Filter and
Fan Assembly
Local Power input
Management Craft Port
12VDC OUT - See AK5000 Ethernet
Technical Practice for details
Figure 5 Compact Remote Unit Front Panel (AK525RU shown)
R4
T4
R8
T8
R3
T1
R1
T2
R2
T3
R7
R6
T7
T6
Second connector for
AK525RU only
R5
T5
AK500 Ethernet Compact Remote Units
2
Document 180-0035-001 R04
