Aksa AAP 1000i, Руководство пользователя и по обслуживанию

Страница: 30 / 42

26
9. Transport/storage
In order to avoid the generator leaking oil during transport of temporary storage, make sure to
switch off the generator, keeping it at a standing pose under normal operations. Turn the ventilating
pole of gas-filling lid to the “close” position counter-clockwise. After the engine is totally cooled,
turn the ventilating pole of the gas-filling lid to the “close” position thoroughly.
Look Out
When transporting the dynamo:
• Do not let the gas spill out of the gasoline tank. (The top of the gas-filling tank should
have no gas.)
• When the generator is placed on vehicle, do not run the engine. You should take the
generator down from the car and operate it in the draught.
• When you take the generator to the car, avoid exposing it to sunshine. If it is put in
sealed carriage for a long time, the high temperature of the carriage may cause
the gas to boiling away, thus leads to burn.
• The cars loaded with generator should not bump on the uneven roads for a long time.
If it has to travel on such roads, the gas in the gasoline tank should be discharged
thoroughly in advance.
Before the dynamo is put into a long-time storage, you should:
1. Make sure the storage area is clean and dry.
2. Discharge the gas thoroughly.
Look Out
• Gas is very easy to burn or explode under specific conditions.
• Smoke and flame are strictly forbidden near the gas.
Screw Driver