Aksa AAP 1000i, Руководство пользователя и по обслуживанию

Страница: 22 / 42

18
Charging wire
(It can be sold independently)
Attention
Warning
6. Usage of the engine
Use of the direct current
The direct current stock is only applicable to charge the automatic battery (12V).
· After the generator is started, the red and the green lights may lighten at the same time.
If the red light goes out automatically in four seconds, it is in working order. If the red light
is still on, please consult the authorized agent of AKSA. During the operation process of
the direct current, turn the intelligent gas-saving valve tot the “close” position.
1. First connected the charging cable to the direct current socket of the generator, and then link to
the junction side of the battery.
• After the
generator
is started, the red and the green lights may lighten at the same time. If the
red light goes out automatically in four seconds, it is in working order. If the red light is still on,
please consult the authorized agent of AKSA In order to prevent spark appearing around the
battery, first link the charging wire to the
generator
, and then to the battery. The dismantlement
should start from the battery.
• After the
generator
is started, the red and the green lights may lighten at the same time. If the
red light goes out automatically in four seconds, it is in working order. If the red light is still on,
please consult the authorized agent of AKSA. Before you link the charging wire to the battery
which is installed on the car, first disconnect the battery’s ground wire until the charging cable
is dismantled. Such operation will help to prevent short circuit or spark when you contact the
junction side of the battery with the car’s frame or body uncertainly.