4
5
INSTALLATION AND USER MANUAL - ORBIT - RECTANGULAR
2. TRAMPOLINE PARTS
3. ASSEMBLY AND INSTALLATION
Orbit 10 x 6 ft
Orbit 11 x 8 ft
Part A
Corner frame part A
1 pc
1 pc
Part B
Corner frame part B
1 pc
1 pc
Part C
Corner frame part C
1 pc
1 pc
Part D
Corner frame part D
1 pc
1 pc
Part E
Middle frame part E
2 pcs
2 pcs
Part F
Middle frame part F
2 pcs
2 pcs
Part G
Trampoline legs
4 pcs
4 pcs
Part H
Leg extensions
8 pcs
8 pcs
Part I
Springs
68 pcs
80 pcs
Part J
Jumping mat
1 pc
1 pc
Part K
Frame pad elastics
16 pcs
16 pcs
Safety net assembly parts
Part L
Poles for safety net
8 pcs
8 pcs
Part M
Safety net
1 pc
1 pc
Part N
Ladder
1 pcs
1 pcs
We recommend at least two people to assemble the trampoline. Use gloves to protect your hands from pinch
points and sharp points during assembly. Do not apply excessive force during assembly that will cause damage
to the product.
The parts are made for assembly without screwing with a simple AkroClick system.
The frame of your trampoline is now
assembled and you can place it on the desired
location.
Continue by joining the frame legs with the
frame parts. Make sure
the free part of the
junction part is turned to the inside of the
frame circle. Rotate the leg extension until
the AkroClick system clicks together to form
a solid connection and teh leg can’t come out
anymore Continue assembling the frame, al-
ternating the frame parts with and without
sockets to form a circle.
Assembling the frame
Place the trampoline frame (Parts from A to
F) flat on the ground. This way you will have a
better overview.
Place the leg extensions on the trampoline
legs (Part H into Part G).
Important:
The trampoline legs could some-
times be slightly tight to fit – it is in-
tended this way to serve as addition-
al strength for the trampoline.
AKROBAT HINT:
For easier assembling of the frame parts
apply some grease for bearing to all junc-
tions.
1
2
3
