akpo WK-4 ANDROS ECO, Инструкция по эксплуатации

Страница: 15 / 22

page
15
The air from the kitchen hood should not be extracted to the chimney flue used for the
extraction of combustion gases from gas or other fuel-burning devices.
2.2 ELECTRICAL CONNECTION
Before connecting the kitchen hood to the power supply, check that the voltage and
frequency of the supply current correspond to the data specified on the appliance nameplate.
The kitchen hood must be connected to an easily accessible socket. It is forbidden to remove
the plug and make a fixed connection of the kitchen hood to the power supply. Connect the
kitchen hood to the power supply after the installation.
3. INSTALLATION
The distance “A” between the lowest part of the range hood and the surface supporting
the pots for preparing dishes should be min. 65 cm for the gas stove (Fig. 3).
Observe applicable laws related to air extraction while performing installation works.
Ensure proper ventilation in case the range hood is used at the same time with gas or other
fuel-burning devices.
Fig. 3
3.1 KITCHEN HOOD BODY INSTALLATION
•
Place the kitchen hood housing to the wall keeping a minimum distance of 65 cm from
the lower edge of the hood to the surface supporting the pots for preparing dishes on